6
7
Wall mounting your Monitor™ 420
Wall mounting your Monitor™ 420
Use the template on page 16 to drill holes in the wall. Leave a
small gap between the screw heads and the wall.
Place your Monitor™ 420 over the screw heads and slide down.
WALL
WALL PLUG
SCREW
102mm
Safety instructions
• Use only the power adaptor supplied.
• There is a slight chance that your answering machine could be
damaged by an electrical storm.
We recommend that you unplug your Monitor™ 420 from the
mains power and telephone line socket during storms.
• Do not place your Monitor™ 420 on untreated antique
furniture.
• Do not use your Monitor™ 420 in damp, humid conditions such
as bathrooms.
• Do not expose the equipment to fire or water.
• Disconnect the telephone line before inserting the back-up
battery (9v 6LR61 not supplied).
Using your Monitor™ 420
To switch the answering machine ON and OFF
Press buttons in the order shown
You can switch your Monitor™ 420 on or off by pressing the
ANSWER ON/OFF
button.
When on, the message indicator on the
PLAY
button lights up.
When off the message indicator goes out.
When set to
ANSWER OFF
your Monitor™ 420 does not delete
messages.
To adjust the loudspeaker volume
Lift the lid to adjust the volume of the loudspeaker.
To increase the volume press +.
To decrease the volume press -. The unit will beep twice when it
has reached its minimum or maximum setting.
Answering machine controls
Answer
on/off
—
Volume
+
72 mm
