40
41
Additional handsets
Additional handsets
(multi handset packs only)
If you have purchased a multi handset pack you
are able to make internal calls, transfer external
calls from one handset to another and use the
conference option.
Call another handset
You can make internal calls between two
handsets.
1. Press
and if you have only one other
handset, it will ring.
2. If you have extra handsets, enter the handset
number to select the other handset you want
to call.
Transfer a call
You can transfer an external call to another
handset registered to the base.
1. During external call, press
. Your external
caller is put on hold.
2. If you have only one other handset, it will ring.
If you have extra handsets, enter the handset
number to select the other handset you want
to transfer to.
3. Press
on the called handset to answer the
call.
4. Press
on the calling handset or place your
handset back in the telephone base or charger
to transfer the external call to the called
handset.
3-Way conference call
You can hold a 3-way conference call between
2 internal callers and 1 external caller.
No subscription is required.
1. During the external call, press
.
Your external caller is put on hold.
2. If you have only one other handset, it will ring.
If you have extra handsets, enter the handset
number to select the other handset you want.
3. Press
on the called handset to answer the
call.
4. Press
and hold
on the calling handset to
setup the conference call.
De-register a handset
1. In standby mode, press
to enter the feature
menu.
2. Press
to select
DE-REGISTER HS
.
3. Enter the system PIN. (Default is
0000
.)
Press
to confirm.
4. Press
to select the desired
handset.
5. Press
, and display will show
DE-REGISTER?
6. Press
to confirm. Display will show
DE-REGISTERED
if it is successful.
NOTE
:
You cannot de-register a handset if any other system
handset is in use.
Register an additional handset
Your additional handset(s) will come pre-
registered but should you need to register a
handset, follow these steps.
1. Press
when in idle mode to enter the
feature menu.
2. Press
to select
REGISTER HS
.
3. Enter the system PIN. (Default is
0000
.)
4. Press
, and display will show
PRESS AND HOLD PAGE BUTTON
!
5. Press
and hold
on the base. until
In Use
light illuminates.
NOTE
:
If the registration is not successful, the display will
show
NO BASE FOUND
. To reset the handset, remove
the handset from the telephone base and place it back
in. Try the registration process again.
1
Содержание Long Range 9750
Страница 26: ...50 51 1...
