24
25
Using the phone
You can store up to 250 names and numbers
in the phonebook. Names can be up to 15
characters long and numbers up to 30 digits.
Store a name and number
1. In standby mode, choose
and press
to select
PHONEBOOK
2. Choose
to access the Phonebook menu.
3. Press
to select
STORE
.
Choose
.
4. Enter the number and choose
.
5. Enter the name and choose
.
6. Choose
to save the phonebook entry.
You must enter a name to go with a number in
order to save the entry.
Entering names
Use the keypad letters to enter names, e.g. to store
Tom:
Press
once to enter T.
Press
three times to enter o.
Press
once to enter m.
Writing tips
Press
to delete the last character or digit.
Press
and hold
to delete all characters or digits.
Press
to move backward or forward
through the characters/digits. Press
to switch
between upper and lower case.
Review an entry
1. In standby mode, press
. The first entry in
the phonebook will be displayed.
2. Press
to select the phonebook
entry that you want.
3. Choose
to view the phonebook entry.
OR
1. Choose
and press
to select
PHONEBOOK
2. Choose
to access the Phonebook menu.
3. Choose
to select
REVIEW
.
4. Press
and
to browse the
phonebook entry
Dial an entry
1. In standby mode, press
to access the
Phonebook.
2. Press
to select the entry you
want, or search alphabetically using the
alphanumeric keypad (see tip below).
3. Press
or
to dial the desired number.
To search alphabetically
Press the relevant keypad button, e.g. for the entries
beginning with T press
once then press
to scroll through the entries.
Phonebook
Redial
Up to 20 of the last telephone numbers called
are saved in the redial list. You can select any of
the numbers to redial or delete.
Redial the last number called
1. Press
. The last number you called will be
displayed.
2. Press
or
to dial the number displayed.
Delete a redial number
1. Press
then press
to move to
the number you want to delete.
2. Choose
to delete the selected entry
Find handset (Paging)
You can ring a handset to help locate it.
1. Press
on the base. All handsets registered
to the base will ring for up to 60 seconds. The
display shows
--PAGING--
2. Press
on the base again to stop the paging
if handsets are on the base or press
or
or any dial pad key (0-9, *, or #) on any
handset, if it’s off the base.
NOTE
: If there is an incoming call during paging, paging
will cease and the phone will ring with the incoming
call instead.
Temporary ringer silencing
Press
or
while the telephone is ringing to
silence the ringer temporarily. This will silence
the ringer without disconnecting the call. The
next incoming call will ring normally at the
preset volume.
NOTE
: Each handset will ring when there is an incoming
call unless the ringer volume is turned off. Pressing
or
on one handset will only silence the ringer of
that particular handset.
Chain dialing
This feature allows you to initiate a dialing
sequence from numbers stored in the
phonebook, call list history or redial list while
you are on a call.
Chain dialing can be useful if you wish to access
numbers other than phone numbers (such as
bank account information or access codes) from
the phonebook, call list history or redial list.
1
Содержание Long Range 9750
Страница 26: ...50 51 1...
