6
Important Safety Instructions
When using your telephone equipment, basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and
injury, including the following:
1. Read and understand all the instructions.
2. Follow all warnings and instructions
marked on the product.
3. Unplug this product from the wall outlet
before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for
example, near a bath tub, kitchen sink,
swimming pool) or in humid areas.
5. Do not overload wall outlets and extension
cords as this can result in the risk of fire or
electric shock.
6. Unplug this product from the wall outlet
and contact Telstra on 13 2203 under the
following conditions:
• When the power supply cord or plug is
damaged or frayed.
• If the product does not operate normally
by following the operating instructions.
• If the product has been dropped and the
outer casing has been damaged.
• If the product exhibits a distinct change in
performance.
7. Avoid using a telephone during an electrical
storm. There may be a remote risk of
electric shock from lightning.
8. Do not use the telephone to report a gas
leak in the vicinity of the leak.
9. Use only the supplied NiMH (Nickel Metal
Hydride) batteries. The operation periods
for the handsets are only applicable with
the default battery capacity.
10. The use of other battery types or non
rechargeable battery/primary cell batteries
can be dangerous. These may cause
interference and/or unit damage. Telstra
will not be held liable for damage arising
from such noncompliance.
11. Use only the AC power adaptors supplied
with this product. Should you lose your AC
power adaptor or it becomes faulty please
contact Telstra on 13 2203.
12. Please ensure that the batteries are inserted
according to the correct polarity as
indicated on the re-chargeable batteries
and the internal markings inside the
handset battery compartment.
13. Do not immerse the batteries in water, and
do not place it in a fire.
14. Telephone receivers produce magnetic
fields that can attract small metallic objects
such as pins or staples. To avoid injury, do
not place the handset where such objects
can be picked up.
7
Getting started
Location
Place your Telstra CR2000 cordless rental phone
within 2 metres of the mains power socket and
telephone socket so that the cables will reach.
Make sure it is at least 1 metre away from other
electrical appliances to avoid interference. Your
Telstra CR2000 MKII cordless rental phone
works by sending radio signals between the
handset and base. The strength of the signal
depends on where you locate the base. Putting
it as high as possible ensures the best signal.
The maximum range between the base station
and the handset is up to 300 meters.
Setting up on a desk
1. Check the arrow direction of the marking
"Desktop" on each of the base and the stand.
2. Following the indicated clicking sequence,
click the stand into the locking grooves at
the back of the base along the arrow
direction of the marking "Desktop" until it
clicks into place.
Note: The marking "Desktop" indicates that your
Telstra CR2000 MKII cordless rental phone can be set
up on a desk when you attach the stand to the base
following the arrow direction accordingly, while the
marking "Wall mount" indicates that your phone can
be mounted on a wall.
Содержание CR2000 MKII
Страница 24: ...46 47...
