Telstra CR2000 MKII, Руководство пользователя

Страница: 10 / 25

18
Using your Telstra CR2000 MKII cordless rental phone
Switch on/off the handset
When the handset is in standby, press and hold
!
to switch the handset off. To switch the
handset on, press and hold the
!
.
Make a call
Post dial
1. Press to access dial tone.
2. Enter the number to dial.
Pre-dial
1. Enter the phone number, maximum 32
digits. If you make a mistake, press Clear to
delete the last digit.
2. Press to dial the number.
Call from the Phonebook
1. Press in standby mode.
2. Scroll or to a Phonebook entry .
3. Press to dial the number.
Search alphabetically for Phonebook
entries
1. Press
Names
then press
Select
to choose
Search
.
2. Press the numeric key containing the first
letter of the name you want. For example,
pressing will show the entries starting
with A. Pressing again will show the
entries starting with B, etc.
Call from the Call List
1. Press Menu and scroll or to Call List .
2. Press Select and scroll or to the call
list you want.
3. Press
Select
and scroll or to an
entry.
4. Press to dial the number.
Out of range warning
When the handset goes out of range of the
base, an audible alert tone will be emitted, and
the call will be disconnected if you are on a call.
When you move back within range, the
handset will automatically reconnect to the
base.
Answer a call
If the handset is not on the charging cradle:
1. When the phone rings, press to answer a
call.
If the handset is on the charging cradle or the
base and
Auto Talk is set to On :
1. When the phone rings, pick up the handset
to answer a call.
If you wish to switch Auto Talk Off, see page 25.
The default setting is On.
Silence
When an incoming call is received you can
choose to ignore the call and silence the ring on
a particular handset by pressing the Silence
display key. If you then want to accept the call
you can do so from the silenced or any other
registered handset by pressing .
Answer a call in handsfree mode
1. When the phone rings, press then press
again. The call will be transferred to the
handset loudspeaker.
2. Press to switch between the earpiece
and loudspeaker.
Note: The base and all other registered additional
handsets will continue to ring after
Silence
has been
pressed.
WARNING: Switching on handsfree mode can suddenly
increase the volume in the earpiece to a very high level.
Make sure the handset is not too close to your ear.
19
Using the phone
Adjust loudspeaker volume
1. Press or to adjust the loudspeaker
volume; 1 - 5 displayed on-screen.
End a call
1. During a call connection, press
!
to end
the call.
OR
Place the handset on the base or charging
cradle to end the call.
Lock keypad
Lock the keypad to prevent accidental dialling
while carrying the handset around.
1. Press and hold . The icon confirms
the keypad is locked and the screen shows
Keypad Locked
.
2. To unlock the keypad, press Unlock then
. The key must be pressed within 2
seconds.
Paging
Paging is a useful way for finding lost handsets.
1. Press
3
on the base. All the registered and
available handsets will ring and display
Paging Call
.
2. Press any key on the handset or press
3
again on the base to stop paging.
Call in progress
The following options are available during a
call:
Adjust earpiece volume
1. Press or to adjust the volume, 1 - 8
displayed on-screen.
Mute
You can mute the microphone so that you can
talk to someone else in the room without your
caller hearing you.
1. Press Mute to turn the microphone off.
2. Press
Off
to cancel the mute function and
turn on the microphone.
Chain dialling
This feature allows you to initiate a dialling
sequence from numbers stored in the
phonebook while you are on a call. Chain
dialling can be useful if you wish to access
numbers other than phone numbers (such as
bank account information or access codes)
from the phonebook.
1. Press
Names
while on a call.
2. Scroll or to the desired entry and
press Select .
3. Press Dial or to dial the selected entry.
Intercom
This feature is only available when there are at
least 2 registered handsets. It allows you to
make internal calls, transfer external calls from
one handset to another and use the conference
option.
During intercom, the user customized handset
name will be ignored, and only
Handset x
will
be displayed. Refer to page 24 to see how to set
a customized handset name.
Call another handset
1. Press
,
.
2. Scroll or to the desired handset and
press Select .
Call timer
Your handset automatically times the duration of each
call. The call timer will display for a few seconds after
the call has been ended. It is shown in hours, minutes
and seconds format (HH:MM:SS).
IMPORTANT: When Keypad is locked, the user can still be
able to dial to emergency numbers 000 and 106. These
emergency numbers are preset at factory and not user
programmable.