Telstra Commander E105, Руководство пользователя

Страница: 6 / 28

to Know Your Commander
Visual Sianals
LAMP
[LINE]
Intercom Off
(located in the Steady glow
[HOLD] key)
Slow flash
Steady glow
LAMP STATUS
Off
Steady glow
Slow flash
Medium flash
Rapid flash
Steady glow
Off
Steady glow
MEANING
Line free
Line busy
Line on hold
Line ringing
Conference in progress
Intercom link free
Intercom link busy
Incoming intercom call
Do Not Disturb activated
On-hook dialling activated
Handset Mode off
Headset Mode activated
Audible Signals
SIGNAL
MEANING
Normal ring
Continuous short ring
Outside call
Intercom call
Short beep followed by voice
Two long beeps
Double chime
Intercom voice call
All-station page
Door Station call
Two short bursts of ring repeated at 90 seconds
intervals
Hold recall
Jo Know Your Commander
Service Tone
Continuous short tone
Slow repeating tone
Intercom ring
Busy
Long repeating tone
Error
I
Access Barring
During installation each station will be allocated one of two modes of call
barring:
l
Unrestricted mode
l
Restricted mode
Numbers are compared to an exception table. If a match is found
the call is allowed.
This table consists of two areas:
A programmable area consisting of eight entries of four
digits each, and;
A non-programmable area with fixed emergency numbers, etc.
Page 4
Commander System User Guide
Page