Telstra Commander E105, Руководство пользователя, Страница: 11 / 28

Intercom Calls
Outside Calls
Intercom Signal Call
To Make an Intercom Call that will Ring at the Called Station:
l
Ensure that the intercom lamp is extinguished
l
Lift the handset
l
Press required DSS key
The intercom
lamp
glows steadily at all other stations.
l
Hear the intercom ring tone
l
Speak when called party answers.
If the called station is busy or in Do Not Disturb mode, you hear a busy tone.
Intercom Voice Call
To Make an Intercom Call in which your Voice Sounds Through the Called
Station’s Speaker:
l
Ensure that the intercom lamp is extinguished
l
Lift the handset
l
Press required DSS key
The intercom lamp glows steadily at all other stations.
l
Press DSS key again
l
Hear a short beep
l
Page the called party.
Off-hook Dialling
To Make an Outside Call with the Handset Off-hook:
l
Lift the handset
l
Press a free [LINE]
The selected [LINE] lamp glows steadily at all stations.
l
Hear the dial tone
l
Dial the required number
l
Speak when the called party answers.
On-hook Dialling
To Initiate an Outside Call Using the On-hook Facility:
l
Press a free [LINE] without lifting the handset
The lamp glows steadily at your station.
The selected [LINE] lamp glows steadily at all stations.
l
Hear the dial tone through the station speaker
l
Dial the required number
. Lift the handset to speak when the called party answers.
The lamp extinguishes.
To Cancel an Outside Call Made with the On-hook Facility if the Called Party
is Busy or Does Not Answer:
l
Press [SPKR].
The lamp extinguishes.
The selected [LINE] lamp extinguishes.