background image

34

HELP

The 

 icon is not scrolling during charge

•  Bad battery contact – move the handset slightly.
•  Dirty contact – Clean the battery contact with a cloth moistened with alcohol.
•  Battery is full – no need to charge.

No dialling tone

•  No power – check the connections. Reset the phone: unplug and plug back in 

the mains.

•  Batteries are empty – charge the batteries for at least 24 hours.
•  You are too far from the base – move closer to the base.
•  Wrong line cable – use the line cable provided.
•  Line adaptor (when needed) is not connected to the line cord – connect the 

line adaptor (when needed) to the line cord.

Poor audio quality

•  The base is too close to electrical appliances, reinforced concrete walls 

or metal door frames – move the base at least one metre away from any 

electrical appliances.

The 

 

icon is blinking or has disappeared

•  Handset is not registered to the base – register the handset to the base.
•  You are too far from the base – move closer to the base.

No ring tone

•  The ring tone is deactivated.
•  Increase the volume.

Caller ID service does not work

•  Check your subscription with your network operator.

A phonebook entry cannot be stored

•  The phonebook is full. Delete an entry to free memory.

No display

•  Try recharging the batteries.
•  Try disconnecting and connecting the base power supply.
•  If LED is not lit up, then try disconnecting and connecting the base power 

supply.

Unable to register another handset

•  Maximum number of 4 handsets has been reached.
•  The display shows 

Searching

. You must unregister a handset in order to 

register a new one.

Noise interference on your radio or television

•  Your base or charger may be too close. Move it as far away as possible.

Colombo EN EU V2.indd   34

21/10/2015   08:51:10

Содержание COLOMBO NEUE





































Отзывы: