Telstra 8100, Руководство пользователя

Страница: 21 / 27

40 41
Phone settings
3. Press and
Y\
to select
HANDSET NAME or TIME
4. Press to confirm.
8.3.7 Set the auto answer
If you turn on the Auto Answer, you
can pick up the call from the cradle
without pressing any key.
1. Press
and
Y\
to select HS
SETTINGS
2. Press and
Y\
to select
AUTO ANSWER
3. Press and
Y\
to turn on
or off the auto answer feature.
4. Press to confirm.
8.4 Base settings
The current settings are marked
with an asterisk in the relevant
menu which is displayed at the
right-hand side of the menu item.
8.4.1 Change the Recall time
Short=100mS.
Medium=270mS.
Long=600mS.
For the Telstra Network, always
leave at the default 100mS (Short)
setting.
8.4.2 Change the system pin
code
A 4-digit system PIN code is used
for changing the system settings of
the base . It is used to protect your
phone against unauthorised use.
The default system PIN code is 0000.
1. Press
and
Y\
to select BS
SETTINGS
2. Press and
Y\
to select
CHANGE PIN
3. Press and enter the 4-digit
Phone settings
system PIN.
4. Enter the old system PIN.
5. Press
and enter the new
system PIN.
6. Press and enter the new
system PIN again.
7. Press to confirm.
Note: If the new PIN entered in Step 6 is
not matched with the new system PIN
entered in Step 5, user will be prompted to
enter the valid system PIN again in Step 5.
8.5 Registration
Your handset and base are pre-
registered. If for some reason, the
handset is not registered to the
base (
flashes even when the
handset is near the base), register
your handset according to the
following procedure.
1. Press and hold on the base
for about five seconds The base
will be entered into registration
mode.
2. Press and
Y\
to select
REGISTRATION
.
3. Press .
4. Enter the 4-digit system PIN.
5. Press
to confirm. If the
handset registration is successful,
you will hear a confirmation tone
and the
will stop flashing.
The handset will automatically
be allocated the next available
handset number. This handset
number is shown in the handset
display in standby mode. If
the handset registration is
unsuccessful, the
will still
flash.