Telstra 8100, Руководство пользователя

Страница: 12 / 27

22 23
Using your phone
4.8.3 Delete a redial number
1. Follow steps 1 and 2 in section
4.8.1.
2. Press and
Y\
to select
DELETE
3. Press to confirm.
4.8.4 Delete the entire redial
list
1. Follow steps 1 and 2 in section
4.8.1.
2. Press and
Y\
to select
DELETE ALL
3. Press to confirm.
4. Press to confirm again.
4.9 Find the handset
You can locate the handset by
pressing
on the base. All the
handsets registered to the base will
produce the paging tone and
PAGING
is displayed on the screen. You can
stop the paging by pressing
/
/ on any handset or on
the base again.
Note: If there is an incoming call during
paging, paging will cease and the phone
will ring with the incoming call instead.
4.10 Using multiple handsets
This feature is only applicable
when you have purchased a multi
handset pack. It allows you to make
internal calls, transfer external
calls from one handset to another
handset and make conference
Using your phone
calls. If the called handset is not
answered within 60 seconds, the
called handset will stop ringing and
the calling handset will return to
standby mode.
Note: If only one handset is registered
to the base , press
will display
NOT
POSSIBLE
4.10.1 Intercom with another
handset
1. In idle mode, press the
available handsets will display.
2. Enter the desired handset number
with which to connect via
intercom.
3. When called handset rings, press
on the called handset to
establish the internal call.
Note: If only two handsets are registered
to the base, pressing
on one handset
will connect to the other handset
immediately.
4.10.2 Call all handsets
1. In idle mode, press and all
registered handsets will display.
2. Press to ring to all registered
handsets.
3. The first handset to answer
will intercom with the calling
handset.