Telstra 5G WI-FI PRO MU500, Руководство пользователя, Страница: 4 / 26

Page 4 of 26
POWER UP YOUR WI-FI HOTSPOT
Press and hold the Power key for 1-2 seconds until the screen lights up.
The Wi-Fi hotspot will be ready for use in about 30 seconds.
To switch your device off, hold the power key then press OK to shut down.
TIPS
When running on battery during periods of inactivity it is normal for the screen to switch off to
preserve battery life. Press the power key once to light up the screen if required.
CONNECT DEVICES BY WI-FI
Your Wi-Fi hotspot can connect up to thirty devices via Wi-Fi providing internet access for all your
devices on the go.
1.
On the devices you wish to connect make sure Wi-Fi is switched on, then search for Wi-Fi
network.
2. The Wi-Fi hotspot will show up as T5G_xxxxxx. Select this to connect.
3. Enter the password which is shown on your hotspot screen at Settings > Wi-Fi > Wi-Fi Name &
Password
4. With Connect Automatically enabled your computer will remember the password and connect
to your Telstra 5G Wi-Fi Pro when it is powered on within range.
Connection example for Windows 7 computer:
1.
On your task bar, next to the clock, click on the Network Interface icon
2. Click on the Wireless network called T5G_xxxxxx
3. Enter the password which is shown on your hotspot screen at Settings > Wi-Fi > Wi-Fi Name &
4. Password
5. With Connect Automatically enabled your computer will remember the password and connect
to your Telstra 5G Wi-Fi Pro when it is powered on within range.
TIP
If you cannot log on via Wi-Fi, connect using the USB-C connection where you can check your Wi-Fi
settings, or update your password. See later for details.
QUICK REFERENCES
Browser home page http://m.home (or http://192.168.0.1)
Administrator login password
Default SSID T5G_xxxxxx
This is shown on the device display.
Default Wi-Fi Key 10 characters which are case sensitive.
This is shown on the device display.
Restore defaults With the device powered ON, open the rear battery cover then locate the
Reset switch next to the bar code label.
Press the Reset button until the screen switches off.
All passwords and settings will be restored to defaults and the hotspot will
reboot.
Use the default credentials from the Security Card or the main screen to
connect to your device.