Telrad CPE-12000SG-PRO-1D-3 Series, Руководство пользователя

Страница: 8 / 110

LTE Outdoor CPE12000 | User Manual 8
1. About this Guide
This document provides information and procedures on the installation and configuration of
CPE12000 LTE Outdoor CPE. Applicable products:

CPE-12000SG-PRO-1D-3.x (for Bands 42&43)

CPE-12000SG-PRO-1D-3.x-B48 (for Band 48)
Prerequisite Skills and Knowledge
To use this document effectively, you should have a working knowledge of Local Area Networking
(LAN) concepts and wireless Internet access infrastructures. In addition, you should be familiar with
the following:
Hardware installers should have a working knowledge of basic electronics and mechanical
assembly, and should understand related local building codes.
Network administrators should have a solid understanding of software installation procedures
for network operating system and troubleshooting knowledge. LTE Indoor CPE has a web GUI
which supports http/https protocol; it could be used to configure the CPE settings through the
web browser by user’s PC. Please refer to the following pages for more detail.
Conventions Used in this Document
The following typographic conventions and symbols are used throughout this document:
Very important information. Failure to observe this may result in
damage.
Important information that should be observed.
Additional information that may be helpful but not required.
bold Menu commands, buttons and input fields are displayed in bold