Telrad CPE-12000SG-PRO-1D-3 Series, Руководство пользователя

Страница: 69 / 110

LTE Outdoor CPE12000 | User Manual 69
Network | MGMT Service
Network > MGMT Service
Dynamic Domain Name System (DDNS) is a mechanism that can map a fixed domain name to a
dynamic IP address. This is very useful when you can only get a dynamic IP in WAN. If DDNS is
enabled, clients can connect to CPE through “DDNS Host Name”.
Enable DDNS: Enable/Disable DDNS.
When DDNS is enabled, select the DDNS service provider you registered from the drop-down
list, and configure the following parameters: DDNS Service Provider , DDNS User Name , DDNS
Password , and DDNS Host Name .
HTTPs Service: When it is enabled, clients in the LAN can link to CPE HTTPs service. Users can
set the port used by HTTPs service. Clients in the WAN side are able to link to CPE HTTPs
service when “ HTTPs service ” is on and “ allow HTTPs login from WAN ” in firewall section is on.
Please note that the clients in LAN and WAN may use different ports to link to CPE HTTPs
service.
The port number setting in this page is only for LAN; if users want to
login to GUI from WAN, it needs to enable “Allow Https login from
WAN” in “ Firewall | Basic”.
Cancel button Reset fields to the last saved values.
Apply button
Commit the changes made and save to the CPE device, some
services will be reloaded.