28
Avanti Attendant console
As shown in the above table, you press the dialpad button
once for the first letter appearing on it, twice for the second
letter appearing on it, and three times for the third letter
appearing on it.
With each press of the button, the corresponding character
appears on the display.
If you want to enter two characters from the same button
on the dialpad, for example D followed by E, wait two sec-
onds between entering characters (until you see the cursor
“_” at the next position), or press the [NEXT] button to indi-
cate you have finished programming that character.
Enter “Z” by pressing [9] four times.
Enter “Q” by pressing [7] two times.
Enter an underline by pressing [1] twice.
Enter a slash by pressing [1] four times.
Warning signal
You hear a three-beep warning tone:
•
If you try to access a Phone Book list that you are not
authorized to use;
•
If you try to save a name without entering a number for it;
•
If you try to add a new name to your private list when
you have no available speed dial bins; or
•
If you try to access a list that has no names defined.
Caller ID
If you receive a call made from a telephone number that
appears in your Phone Book, and if your system supports
Caller ID, the name programmed for that number in the
Phone Book appears on your telephone display, instead of
the number.
Atc_txt.book Page 28 Wednesday, August 4, 1999 11:56 AM
