Telos Vset, Инструкция по установке и эксплуатации

Страница: 26 / 32

Chapter 5 |
18
Web Graphical User Interface
The Default login is:
User Name: user
Password:
Screenshot
This button will load the current VSet display onto the browser for troubleshooting and diagnostics. Just copy and paste.
Config
Use this function to backup the configuration of the VSet. This makes it easy to reload settings into the VSet if it happens to
forget what it’s supposed to do, or if you replace the VSet.
Once the VSet is all set and ready to go, click the Backup Button. This will allow you to save an XML file to your computer. To
load a configuration file, click the Browse button and select the appropriate XML file. The file will display in the config section
to confirm. Once you have confirmed the file, click Restore.
NOTE: The network configuration, i.e. IP address and net mask, will not be saved in the config file, therefore
cannot be restored. You will have to enter those manually using the steps in the Installation chapter of this
manual.
Firmware Upgrade and Version
The time may come to update the firmware inside the VSet. Firmware updates fix problems that may exist and improve on
functionality in general.
The first step is to get the new firmware onto your PC. This will usually done via a download from the Telos website or an email
attachment from Telos customer support. The file will have the extension *.vspk. When the firmware is available on you PC,
click the Browse Button to locate it, and then click Upgrade to load it into the inactive bank on the VSet.
Once the software loads into the VSet, it is now necessary to reboot the VSet into the new firmware. To do this, click on the
Inactive Bank’s radio button in the Firmware Version section of the GUI, and after confirming that this Bank has the new
firmware on it, click Change Bank.
The VSet will reboot and when it comes back to life, it will be running the new firmware. To verify, you can look at the very top
of the GUI and read the software version and build date. If you are still not convinced, you can press the Menu Button on the
VSet and navigate to the About Screen.
IMPORTANT: DO NOT run the software on your computer. The software is meant to run on the VSet. So if
you have your browser set to automatically run downloaded files, turn it off for this process.