Telos Omnia ONE Multicast Скачать руководство пользователя | Manualshive

Страница: 57 / 61

background image

Warranty

This Warranty covers "the Products," which are defined as the various audio equipment, parts, software
and accessories manufactured, sold and/or distributed by TLS Corp., d/b/a Omnia (hereinafter
"Omnia").

With the exception of software-only items, the Products are warranted to be free from defects in material
and workmanship for a period of two years from the date of receipt by the end-user.

Software-only items are warranted to be free from defects in material and workmanship for a period of 90
days from the date of receipt by the end-user.

This warranty is void if the Products are subject to Acts of God, including (without limitation) lightning;
improper installation or misuse, including (without limitation) the failure to use telephone and power
line surge protection devices; accident; neglect or other damage.

EXCEPT FOR THE ABOVE-STATED WARRANTY, OMNIA MAKES NO WARRANTIES, EXPRESS OR
IMPLIED (INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE).

In no event will Omnia, its employees, agents or authorized dealers be liable for incidental or
consequential damages, or for loss, damage, or expense directly or indirectly arising from the use of any
of the Products or the inability of the end-user to use any of the Products either separately or in
combination with other equipment or materials, or from any other cause.

In order to invoke this Warranty, Omnia must receive notice of a warranty claim within the above-stated
warranty period and Omnia must authorize warranty coverage. If Omnia authorizes the performance of
warranty service, the defective Product must be delivered, shipping prepaid, to: Omnia, 2101 Superior
Avenue, Cleveland, Ohio 44114.

Omnia, at its option will either repair or replace the Products and such action shall be the full extent of
Omnia’s obligation under this Warranty. After the Products are repaired or replaced Omnia will return
them to the party that sent the Products, and Omnia will pay for the cost of shipping.

Omnia’s authorized dealers are not authorized to assume for Omnia any additional obligations or
liabilities in connection with the dealers’ sale of the Products.

Omnia products are to be used with registered protective interface devices that satisfy regulatory
requirements in their country of use.

OmniaONE Multicast - Use and Operation Manual – Version 0.90

57

«
...
55
56
57
58
59
...
»

Содержание Omnia ONE Multicast






























































Отзывы:

Нет отзывов

Похожие инструкции для Omnia ONE Multicast

Бренд: Viking Страницы: 17

Бренд: Navitar Страницы: 2

Бренд: Premier Mounts Страницы: 1

Бренд: Acer Страницы: 34

Бренд: Acer Страницы: 64

Бренд: Acer Страницы: 45

Бренд: Acer Страницы: 2

Бренд: NEC Страницы: 12

Mosaic Connect Box

Бренд: NEC Страницы: 18

Бренд: NEC Страницы: 8

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 6

Бренд: NEC Страницы: 20

Бренд: NEC Страницы: 14

Бренд: NEC Страницы: 70

Бренд: NEC Страницы: 28

Бренд: NEC Страницы: 261

Бренд: NEC Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды