Telos Omnia ONE Multicast, Инструкция по установке и эксплуатации

Страница: 32 / 61

Save Preset
This option saves any changes you have made to the currently running preset into the OmniaONE’s non-volatile
memory. Changes can be saved over an existing user preset (without renaming it) or as a new user preset with a new
name. You may not save a factory preset over itself with the same name and attempting this will generate the error
message: “Cannot overwrite factory preset. Save preset with new name.”
Presets can contain up to 10 characters.
To save your changes proceed as follows:
Highlight Save Preset and click. “Name” will be highlighted and the Name field will automatically display the
existing preset name. If you wish to overwrite this existing preset with your changes, just rotate the jog wheel
clockwise to highlight the Save button and click. Your changes will be saved to the existing preset.
If instead, you wish to save your changes as a new user preset with a different name, click the jog wheel while
“Name” is highlighted and the editing cursor will appear, highlighting the first character of the existing preset name.
This is “select” mode.
At this point you can scroll left and right through the text by rotating the jog wheel knob. Be careful not to scroll
clockwise past the blank space just after the last character of the preset name or “select” mode will be cancelled. If
this happens, simply rotate the knob counter-clockwise until “Name” is highlighted and click to re-enter “select”
mode.
When you reach the character you want to edit, click. This puts the cursor in “edit” mode. You can now change that
character by scrolling through the character list with the knob. When the desired character is found, click. This will
return the cursor to “select” mode and you can again turn the knob to select the next character to edit.
-To delete a character... Select the character to be deleted, click, choose the " < " symbol and click again to delete
that character. Characters can only be deleted one at a time.
-To insert a character between 2 existing characters... Select the character just after where the new character is to be
inserted, click, choose the " ^ " symbol and click again. The new character appears. Now rotate the knob to select the
desired character for it and click to accept. (Note that this inserts a new character before the one selected, and keeps
the originally selected character intact as what it was before choosing "^")
When you are finished, simply rotate the knob clockwise (with the cursor in “select” mode) until the Save button is
highlighted and click to save the preset. Your new user preset will now appear in the Preset: menu.
-To cancel at any time without saving… With the cursor in “select” mode, rotate the knob clockwise until
Cancel
is
highlighted and click.
Delete Preset
This option allows a preset to be deleted. You may never delete a factory preset. An error message will be generated
if you attempt to do so. You may delete the last preset that was loaded. The loaded settings, along with any
changes, will continue to “live on” as the current settings, but cannot be recalled again until they are saved.
To delete a user preset highlight Delete Preset and click. Rotate the jog wheel to display the preset to be deleted.
Click the jog wheel and that preset will be instantly deleted. Warning: There is no delete confirmation dialog!
If you wish to exit without deleting a preset, rotate the jog wheel clockwise until *cancel* is displayed in the preset
list and click.
OmniaONE Multicast - Use and Operation Manual – Version 0.90
32