Telos Omnia ONE Multicast, Инструкция по установке и эксплуатации

Страница: 37 / 61

The attack control adjusts how fast the limiter responds to sudden increases in audio level, and
higher numbers equate to faster response times. Faster attack times reduce the transient nature of
the input audio, while slower attack times improve it. Extremely slow attack times must be used
with caution because allowances must be made in the following final limiter stage so as not to
overload it during the time when the limiter is adjusting the level downwards.
LFLim Rls (Low Frequency Limiter Release)
The release control adjusts how fast the limiter recovers from periods of more gain reduction
when the input audio levels fall. Faster release times (higher numbers) result in a more dense
sound. Even though the Omnia uses program controlled release algorithms, setting the control for
extremely fast release times can result in ‘pumping’ as well as extremely dense-sounding
(fatiguing) audio.
LFLim Hold (Low Frequency Limiter Hold Threshold)
During operation of the limiter, the algorithm is watching for very small decreases in audio level,
such as what occurs right after a sudden peak. When this occurs, the limiter release is temporarily
stopped. The result is a drastic reduction in intermodulation distortion and a more open sound,
even though the audio is still quite dense. The level at which the hold takes place is controlled by
the setting of the hold Thresh control. Higher numbers cause the hold to activate at higher audio
levels. The action of limiter hold also works in conjunction with the preceding AGC gates to
reduce noise rush up during periods of no audio or pauses in speech.
<-Exit
Click on this option to return to the Adjust Processing submenu.
Mid Band Limiter
See description of settings for Low Band Limiter
Presence Band Limiter
See description of settings for Low Band Limiter
High Band Limiter
See description of settings for Low Band Limiter
Mixer
Low Band
Adjusts the output level of the low band limiter into the following final limiting stage. Higher
numbers result in more low frequencies and too much mix level can make the following final
limiter work unnecessarily hard.
Mid Band
Adjusts the output level of the mid band limiter into the overall mix. Higher numbers result in
more mid frequencies and too much mix level can make the following final limiter work
unnecessarily hard.
Presence Band
OmniaONE Multicast - Use and Operation Manual – Version 0.90
37