Telonics MINI-12, Руководство пользователя

Страница: 27 / 62

Telonics TCA-500C Combo Amp
27
PB-009289 Rev E
TCA-500C C
OMBO
A
MP
C
ONTROL
F
UNCTIONS
& J
ACKS
:
R
EAR
P
ANEL
(
CONTINUED
)
Foot Switch
The Foot Switch jack on the rear panel may be used to switch the TBro and/or
the internal Reverb effects circuit on and off. A ¼ inch TRS (tip, ring, and
sleeve) stereo plug is needed. The sleeve is common, tip is TBro and ring is
reverb. The switch will enable the effects in the closed position.
Note that the type of switch to be used must ‘not’ be a momentary contact type,
but rather a continuously on or off type, such as a toggle switch.
Aux Input
(Stereo)
The Auxiliary Input on the rear panel accepts a ¼” stereo or monaural
plug and may be used to inject audio from a CD, MP3 player or other
line level source, for home practice or live gigs. Use the
Aux (stereo)
Level control on the front panel to set the desired music level.
The Aux Input provides a secondary input to the amplifier that sums into
the system such that it can be heard via the headphones, main speaker and
XLR Direct Out. The Aux Input is a stereo ¼” TRS Jack input; signals
fed via this input in stereo will remain in stereo when fed out to the stereo
Headphones jack. Signals fed via this input are summed to a mono signal
before being fed to the speaker and XLR Direct Out.
This input can be used in one of three ways:
i) A CD / MP3 Player connected to the Aux Input will allow tracks to be
played for practice and small gigs.
ii) An additional effects processor output can be returned via this input.
iii) A guitar effects unit output can be connected into this input, enabling
the amplifier to be used for both steel and guitar.
Note; this input is optimised for a 0dB line level signal.
Note; Signals applied to the Aux Input will be analog modelled when
output from the Direct Out.