TL113046
Installation Manual Ford F650 TELMA AF50-90 SPL100 relay box 124 UIM
Page 7 of 18_____________________________________________________________________________15sep21jh
2.4 INSTALLATION OF THE TELMA IN THE CHASSIS
Assemble the mounts to the Telma brackets as shown below with the male portion of the mounts
on the bottom side of the brackets.
Use fasteners included in the rubber mount kit JZ1007XX-45 to attach the Telma and bracket
assembly to the chassis brackets which were installed previously.
Install the Telma, equipped with the brackets and rubber mounts to the chassis brackets in the
hanging position.
As shown below, secure the Telma to the chassis bracket using the M16x2.0x110mm long bolts
through the holes in the chassis brackets, mounts and retarder brackets. At each mount, install
two M16x71mm (2.80”) diameter flat washers (one on each end of the rubber mount, one M16
spring washer under the head of the bolt and another between the large diameter flat washer
and the M16 all metal lock nut. Tighten to 150 lb.-ft. (±10%).
Place ¼” square washer TIB03107 on top of chassis bracket at each mount and tack weld in
place after retarder is in final position.
