Telma TL113046, Руководство по установке

Страница: 11 / 18

TL113046
Installation Manual Ford F650 TELMA AF50-90 SPL100 relay box 124 UIM
Page 11 of 18_____________________________________________________________________________15sep21jh
SECTION 3 CONTROL SYSTEM COMPONENTS INSTALLATION
3.1 RELAY BOX MOUNTING

Mount the relay box brackets 2 x TIB01017 to the relay box using the 5/16” bolts, nuts, and lock
washers supplied in the kit.

Mark and drill two ½” holes in the frame using the relay box and bracket assembly as a guide. Install
the relay box and bracket assembly to the inside of the left frame rail using the ½” bolts and lock
washers supplied in the kit.

Tighten the four 5/16” bolts to 17 lb-ft (±10%) and the two ½” bolts to 75 lb-ft (±10%).
NOTE: Brackets TIB01017 are not needed if the relay box is to be mounted to the outside of the frame
rail.
3.2 LIGHT BAR INSTALLATION

The Light Bar should be mounted so that it is easily visible to the driver.

Make a rectangular hole 7/8” wide x 1 ¾” tall in the lower dash to the right of the steering column or install the Light Bar
in an existing console receptacle.

Plug the Light Bar harness TID31014 on to the Light Bar TIG11010.

Feed the harness with the Light Bar connected through the hole.

Plug the Light Bar into the hole
PANEL OPENING