Mounting instructions for TQ12 ver 2 Production tracker
- TQ12 Production Tracker
- Delivery from TelliQ
Unit
TQ12 ver 2 Production tracker
Changes since former version
●
Black wire connects to GROUND
●
Blue wire connects to 1WIRE POWER
●
Unit has 3 DIN, 2 DOUT and 1 AIN
●
Unit has 10 wires
Relay
(Accessories)
RFID reader
(Accessories)
- Mounting materials
Mounting materials and tools shall be provided by the installer.
When installing TQ12 you will need:
●
Cable ties or double-sided tape
●
Terminal block
●
Fuse Holder
●
Fuse 2-3A
●
Cables for extension( depends on installation)
- Important to know before installing the TQ12 Production Tracker
TQ12 Production tracker is suitable for installation on construction machines. The unit must be installed differently depending on whether
the machine's main power switch located on the battery positive or negative side, as well as the function desired by the device. Electrical
wiring is divided into the following scenarios:
●
Main power switch on negative side
(main power switch is located on the machine negative side)
o Installation for collecting positioning and production data (running hours, etc.)
●
Main power switch on positive side
(main power switch is located on the machine positive side)
o Installation for collecting positioning and production data (running hours, etc.)
- Mounting recommendations
The unit should be placed in an area where there are no disturbing elements (i. e. metal) over or besides the unit. The unit has built-in
antennas, which makes the location of the unit important for achieving good coverage to the sky.
The unit should be mounted as horizontal as possible, do not tilt the device more than 30 degrees, to ensure proper operation.
The unit needs an undisturbed view to the sky for full functionality and connectivity.
Fasten the unit firmly using cable ties in the dedicated holes on the unit’s enclosure. Make the machine powerless by disconnecting the
battery before connecting the unit to the machine.
Note if the main power switch is placed on the battery's negative side or the positive side.
Page
2 (8)
