3
1 Main functions of the GPRS Pager3
The GPRS Pager3 can be used as an optional transmission module for alarm control
panels, as well as an individual 4 zone GPRS alarm control panel.
Further functions:
•
Sending SMS with adjustable text for each event
•
Different events for activation and restoration of inputs
2 Operating mode, installation
In normal mode signals of the GPRS Pager3 are transfered first from the GPRS station
to the monitoring station's router through internet, then to the TEX server. After the
adequate transformations, the server forwards the alarm signals towards the monitoring
station client PC through serial port. On the client PC any kind of monitoring station
program can be used, even the one used so far (e.g. Alarm-Sys):
2.1 Installation if no local network is available
In case there is no local network at the monitoring station or the Pager would be
installed separately from the existing local network and no router is used to divert data
traffic, a fixed IP address obtained from the internet service provider should be set in the
server’s software. In order to assure establishing and maintaining of the internet
connection an external device is needed, for example using ADSL connection an ADSL
router is necessary into which the connection password and user ID has to be set as
well as the continuous maintenance of the connection. E.g. without router is possible the
use of most cable TV type internet services. In this case request technical help from
manufacturer.