3
1 Application
Communicator for fire alarm control panels, that converts the contact input events to
SIA IP format and sends to the alarm monitoring receiver through IP channel on mobile
GPRS network. It can be used for any control panel which has contact outputs or the
contact outputs can be obtained with relays. Using this module, the input events are sent
to the monitoring station’s IP receiver over the GPRS network, using SIA IP protocol
based on ANSI/SIA DC-09-2007 standard. No need for a central server, only an IP
receiver with internet connection is necessary. The module works with the following
receiver types:
TELLMon
,
AMR-08
and
ENIGMA II
.
2 Functions
Parallel usage of two independent GSM modules
Reporting up to 4 IP addresses, which means 2 primary IP addresses per network
6 NO/NC/EOL contact inputs
6 alarm activated NO relay outputs
Programmable by PC software and by SMS
Test report with configurable sending frequency for automatic checking of the
transmission channel
The programming software and manual are available on the internal memory of the
device which acts as a USB drive
3 Module overview
