12
?
Primary 1B comment
IPC1B
=
comment
#
?
Primary 1B IP address
IP1B
=
IP address (e.g.
111.222.33.44
)
#
?
Primary 1B port number
PORT1B
=
port
(e.g.
3535
)
#
?
Primary 1B user account ID
UID1B
=
user account ID (e.g.
1234
)
#
?
Primary 1B test sending frequency
FR1B
=
test frequency (in seconds) (e.g.
60
)
#
?
Primary 1B protocol
PROT1B
=
TELLMon_TCP
TELLMon_UDP
AMR-08
ENIGMA_II
#
?
Primary 2B comment
IPC2B =
comment
#
?
Primary 2B IP address
IP2B =
IP address (e.g.
111.222.33.44
)
#
?
Primary 2B port number
PORT2B =
port
(e.g.
3535
)
#
?
Primary 2B user account ID
UID2B =
user account ID (e.g.
1234
)
#
?
Primary 2B test sending frequency
FR2B =
test frequency (in seconds) (e.g.
60
)
#
?
Primary 2B protocol
PROT2B =
TELLMon_TCP
TELLMon_UDP
AMR-08
ENIGMA_II
#
?
Low battery voltage threshold
BATL
=
e.g.
11800
(9000…30000 mV)
#
?
Voltage restore threshold
BATH
=
e.g.
12500
(9000…30000 mV)
#
Restart module after 30sec.
RESET = 1
#
The module sends response message about the modifications, e.g.
IP1A OK
, except for
the superuser registration.
Examples:
Registering the Superuser phone number:
SUPERUSER#
The module executes the registration, but does not send response message for this
command!
Erasing the Superuser phone number:
SU=#
Setting the Primary 1A IP address (e.g. 111.222.33.44), port number (e.g. 3545), user
account ID (e.g. 1234), test frequency (e.g. 60s) and the protocol (e.g. TELLMon_UDP),
then restarting the module:
IP1A=111.222.33.44#PORT1A=3545#UID1A=1234#FR1A=60#
PROT1A=TELLMon_UDP#RESET=1#
Setting the low battery and restore voltage thresholds (e.g. 11,8V and 12,5V):
BATL=11800#BATH=12500#
Querying the Primary 1B IP address, port number and user account ID:
IP1B?#PORT1B?#UID1B?#
To erase a setting value, do not write a new value in the command, leave the value part
blank. E.g. to erase the Primary 1B IP address:
IP1B=#
