10
Configuring the inputs:
You can configure the default state (NO or NC) and the sensitivity of the inputs
in the
Inputs
menu.
The device can be configured to send notifications via SMS or voice call,
when a contact input is triggered. You can configure the recipient phone numbers
in the
Reporting channels
menu, and the input-triggered notifications to these
numbers in the
Input events
menu.
Configuring the outputs:
You can configure the control mode for the outputs in the
Outputs
menu.
When selecting the control mode, you can customize the parameters for opening
and closing pulses (A, B or X, Z), the interval for keeping the gate locked in open
state (Y), and the delay for intervention in the photocell loop (W), depending on
the control mode chosen.
Configuring the entry period:
A user may have permission to control the outputs at anytime (0-24) or only in
the configured entry period. You can configure the
Permitted entry period
in
the
General
device settings menu and the permission for each user in the
Users
menu.
SMS forwarding:
The device can forward incoming SMS messages to the configured phone
number. For this, configure the phone number in the
SMS forwarding phone
number
field
.
-> Chapter 5.2.1, 5.2.2, 5.2.3, 5.2.4, and 5.2.5 of the Installation and Application
Manual.
For more information please read the
Installation and Application Manual
.
