ZE51/61-2.4 RF module User Guide
1VV0300868
Rev.4 – 23/06/201
1
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 52 of 54
VIII.2.
Conformity Assessment Issues FCC/IC
Modules ZE51/61 are FCC/IC approved as modules to be installed in other devices. If the final product after
integration is intended for portable use, a new application and FCC/IC is required.
FCC Notice
The FCC notifies users that any changes or modifications made to this device that are not expressly approved by
Telit Communications S.P.A. may void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Wireless notice:
This product emits radio frequency energy, but the radiated output power of this device is far below the FCC radio
frequency exposure limits. This equipment complies with FCC RF radiation exposure limits forth for an uncontrolled
environment. Nevertheless, the device should be used in such a manner that the potential for human contact with
the antenna during normal operation is minimized.
IC Notice
This Class B digital apparatus complies with Canadian ICES-003, RSS-Gen and RSS-210.
Cet appareil numérique de la classe B est conforme à la norme NMB-003, CNR-Gen et CNR-210 du
Canada
These radio transmitters ID: 5131A-ZE51 and 5131A-XE61 has been approved by Industry Canada to operate with
the antenna types listed below with the maximum permissible gain and required antenna impedance for each
antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this device.
Les présent émetteures radio ID: 5131A-ZE51 e 5131A-XE61 a été approuvé par Industrie Canada pour
fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance
requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur
au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Fractus Micro Reach Xtend
TM
Chip antenna
Taoglas Dipole Stub
Antenna gain
2 dBi
5 dBi
Antenna impedance
50
50
