Telit Wireless Solutions ME910C1 Series, Быстрый старт

Страница: 10 / 23

10 of 23
Reproduction forbidden without Telit Communications PLC written authorization – All Rights Reserved
4 Check Network
Registration
By default the device perform auto attach and receive an IP from the network.
In this case the active <cid> is 1 and APN will be filled automatically from the network.
If different APN is required an new <cid> should be defined with
AT+CGDCONT=<cid>,APN.
This behaviour can be seen with
Command syntax: AT+CGCONTRDP=
Possible response(s):
+CGSCONTRDP:
<cid>,<p_cid>,<bearer_id>[<CR><LF>
+CGSCONTRDP: <cid>, <p_cid>,<bearer_id> [
…
]]
Example:
AT+CGCONTRDP=
+CGCONTRDP:
1,5,"lte.tim.it.mnc001.mcc222.gprs","10.0.105.40.255.0.0.0","10.0.105.41","213.230.130.222"
,"213.230.130.222","0.0.0.0","0.0.0.0"
OK
Command syntax:: AT+CGPADDR=
+CGPADDR: <cid>,<PDP_addr>[<CR><LF>+CGPADDR: <cid>,
<PDP_addr>[…]]
Example
AT+CGPADDR=
+CGPADDR: 1,"10.0.105.40"
+CGPADDR: 2,""
OK
This APN lte.tim.it.xxx has been set by the network.
If you need to use a different APN you can set it with the command described before