![Telit Wireless Solutions LN930 Скачать руководство пользователя страница 51](http://html1.mh-extra.com/html/telit-wireless-solutions/ln930/ln930_user-manual_1083811051.webp)
LN930 M.2 Hardware User Guide
1VV0301078 Rev.10 – 2015-11-11
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 51 of 88
5
Windows Software Components
The following section describes the system architecture of Inter-Processor Communication on
a WWAN M.2 module when connected to a Microsoft Windows® based Host OS Windows®
7, Windows® 8.x.
The software components of a WWAN M.2 module running Windows® 7 and
Windows® 8 are depicted in Figure 12 and Figure 13 respectively.
In the Windows® 7 architecture:
•
The Windows® 7 driver interfaces with the WWAN M.2 modem using a virtual
terminal connection over CDC-ECM.
•
A Third party connection manager utilized
•
Independent Hardware Vendor (IHV) provided MBIM driver
In the Windows® 8 architecture:
•
Microsoft requirements:
o
MBIM interfaces
o
User Mode Driver Framework (UMDF) driver for GNSS, and Firmware
Update, Carrier Switching application.
o
RTD3 support
For all Windows platforms:
•
The WWAN M.2 module is exposed as a composite device
•
GNSS will be supported through a serial interface
•
When mobile broadband is disabled, GNSS will still be available.
•
The mobile network adapter driver will interface to the modem software through the
MBIM interface.
•
All Intel specific features will be supported through MBIM.
•
The connection manager provided with Win 8 OS and above will be used. For
•
Win 7, the IHV provided connection manager is used.
•
There will be an application layer to hide the differences in the mobile broadband API
between Win 7 and Win 8.