Telit Wireless Solutions LE910C1 Series Скачать руководство пользователя страница 4

Страница: 4 / 119

LE910C1

Hardware User Guide

1VV0301298 Rev. 1.08 - 2017-11-14

Telit Confidential Information, provided under NDA

Page

4 of 119

Usage and Disclosure Restrictions
License Agreements

The software described in this document is the property of Telit and its licensors. It is furnished by

an express license agreement only and may be used only in accordance with the terms of such an

agreement.

Copyrighted Materials

Software and documentation are copyrighted materials. Making unauthorized copies is prohibited

by law. No part of the software or documentation may be reproduced, transmitted, transcribed,

stored in a retrieval system, or translated into any language or computer language, in any form or

by any means, without prior written permission of Telit.

High Risk Materials

Components, units, or third-party products used in the product described herein are NOT fault-

tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in

the following hazardous environments requiring fail-safe controls: the operation of nuclear

facilities, aircraft navigation or aircraft communication systems, air traffic control, life support, or

weapons systems (“high risk activities"). Telit and its supplier(s) specifically disclaim any expressed

or implied warranty of fitness for such high-risk activities.

Trademarks

TELIT and the stylized T logo are trademarks and/or registered trademarks of Telit Communications

S.p.A. in the Unites States and/or other countries. All other product or service names are the

property of their respective owners.

Copyright © 2017 Telit Communications S.p.A.

Содержание LE910C1 Series
























































































































Результаты поиска

Содержание LE910C1 Series

Отзывы:

Бренды по названию

Популярные бренды

Telit Wireless Solutions LE910C1 Series, Руководство пользователя по оборудованию

Результаты поиска

Содержание LE910C1 Series

Отзывы:

Бренды по названию

Популярные бренды