GM862 Product Description
80272ST10019a Rev. 10 – 18/09/2008
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 59 of 60
10 Document Change Log
Revision
Date
Changes
ISSUE#0
10/04/05 initial release.
ISSUE#1
27/10/05 Paragraphs reviewed:
1 Overview
2.1
Dimensions (GPS antenna position frozen)
2.3.1 Temperature
range
2.6 Reference
sensitivity
2.7.1 GSM
Antenna
2.8 GPS
Module
features
2.8.1.1 GPS Sensitivity
2.8.1.2 GPS Consumption
2.12.9 Character
management
2.12.12 Indication of network service availability
2.17
ADC Converter (GM862-GPS only)
4
AT Commands (Camera cmds, FTP cmds, GPS cmds,
#NITZ, #SKIPESC, etc)
5.1.5 FTP
Client
ISSUE#2
24/01/06 Added products order codes table on page 2
ISSUE#3
04/05/06 7.2 GM863-QUAD: RoHS certificate
7.3 GM862-QUAD-PY: RoHS certificate
2.14.1 Reset signal: unconditional reboot page 24
ISSUE#4
04/08/06 2.7.2 GPS antenna power supply changed
2.12.16 DTMF Tones: changed minimum duration of DTMF tone
2.14 Logical level specification: voltage on buffered pins
2.14.1 Reset signal: unconditional shut down for GM862-GPS
2.15 Audio level specification
2.18 Interface connectors on GM862 modules: Added size for the
Molex male connector; Added NOTE after pin table (page 33);
changed value of the maximum capacitor allowed for SIMVCC line
3.1.4.1 Telit GM862 Family modules interface connector: Added size
for the Molex female connector
5.4 CMUX: new paragraph dedicated to the products with the
following P/N: 3990250657, 3990250658 and 3990250659
5.4 SAP: new paragraph dedicated to the products with the
following P/N: 3990250657, 3990250658 and 3990250659
6 AT Commands: updated AT command list (CMUX, SAP, GPS
and others: see rows in yellow) and added columns for the new
products
7.1 GM862-QUAD
(P/N:3990250655)
: Conformity Assessment
7.2 GM862-QUAD-PY
(P/N:3990250656)
: Conformity