GM862 Product Description
80272ST10019a Rev. 10 – 18/09/2008
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 40 of 60
6 Conformity Assessments
The
Telit GM862 modules
are assessed to be conform to the R&TTE Directive as
stand-alone products, so
if the module is installed
in conformance with Telit
Communications installation instructions
require no further evaluation under
Article 3.2 of the R&TTE Directive and do not require further involvement of a
R&TTE Directive Notified Body for the final product. In all other cases, or if the
manufacturer of the final product is in doubt then the equipment integrating the
radio module must be assessed against Article 3.2 of the R&TTE Directive
.
In all cases assessment of
the final product must be made against the Essential requirements of the R&TTE Directive Articles
3.1(a) and (b), safety and EMC respectively, and any relevant Article 3.3 requirements. The
Telit
GM862 modules
are conform with the following European Union Directives:
•
R&TTE Directive 1999/5/EC (Radio Equipment & Telecommunications Terminal Equipments)
•
Low Voltage Directive 73/23/EEC and product safety
•
Directive 89/336/EEC for conformity for EMC
In order to satisfy the essential requisite of the R&TTE 99/5/EC directive, the GM862PCS module is
compliant with the following standards:
•
GSM (Radio Spectrum). Standard: EN 301 511 and 3GPP 51.010-1
•
EMC (Electromagnetic Compatibility). Standards: EN 301 489-1 and EN 301 489-7
•
LVD (Low Voltage Directive) Standards: EN 60 950
In this document and the Hardware User Guide, Software User Guide all the information you may
need for developing a product meeting the R&TTE Directive is included.
Furthermore the
Telit GM862-QUAD, GM862-QUAD-PY
and
GM862-GPS modules
is FCC Approved as module
to be installed in other devices. If the final product after integration is intended for portable use, a new
application and FCC is required.
The
Telit GM862-QUAD, GM862-QUAD-PY and GM862-GPS modules
are conform with the following US
Directives:
•
Use of RF Spectrum. Standards: FCC 47 Part 24 (GSM 1900)
•
EMC (Electromagnetic Compatibility). Standards: FCC47 Part 15
To meet the FCC's RF exposure rules and regulations:
•
The system antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all the persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
