Telit Wireless Solutions CE910-DC, Руководство пользователя по оборудованию

Страница: 49 / 67

The CE910 module is provided by a set of Digital Input / Output pins
Input pads can only be read; they report the digital value (high or low) present on the pad at the read
time.
Output pads can only be written or queried and set the value of the pad output.
An alternate function pad is internally controlled by the CE910 firmware and acts depending on the
function implemented.
The following GPIOs are available on the CE910:
Pin Signal I/O Function Type
Default
State
Note
C8
GPIO_01 I/O Configurable GPIO CMOS 1.8V INPUT
Alternate function
STAT_LED
C9 GPIO_02 I/O Configurable GPIO CMOS 1.8V INPUT
C10
GPIO_03 I/O Configurable GPIO CMOS 1.8V INPUT
C11 GPIO_04 I/O Configurable GPIO CMOS 1.8V INPUT
B14
GPIO_05 I/O Configurable GPIO CMOS 1.8V INPUT
C12 GPIO_06 I/O Configurable GPIO CMOS 1.8V INPUT
C13
GPIO_07 I/O Configurable GPIO CMOS 1.8V INPUT
K15 GPIO_08 I/O Configurable GPIO CMOS 1.8V INPUT
L15 GPIO_09 I/O Configurable GPIO CMOS 1.8V INPUT
G15
GPIO_10 I/O Configurable GPIO CMOS 1.8V INPUT