Telit Wireless Solutions BLUEMOD+S42/AI/ADC/LUA Скачать руководство пользователя страница 8

Страница: 8 / 85

S42

Hardware User Guide

1VV0301303 Rev. 11

Page 8 of 85

2021-05-06

Not Subject to NDA

INTRODUCTION

1.1.

Scope

This document provides information how the S42/AI can be integrated into
customer systems. It addresses hardware specifications of the S42/AI and
requirements of the hardware environments for the S42/AI.

Note/Tip: The description text

“S42” refers to all modules

listed in the applicability table.

1.2.

Audience

This document is intended for Telit customers, especially system integrators, about to
implement Bluetooth modules in their application.

1.3.

Contact Information, Support

For general contact, technical support services, technical questions and report of
documentation errors contact Telit Technical Support at:

•

•

•

•

•

Alternatively, use:

https://www.telit.com/contact-us/

For detailed information about where you can buy the Telit modules or for
recommendations on accessories and components visit:

https://www.telit.com

Our aim is to make this guide as helpful as possible. Keep us informed of your comments
and suggestions for improvements.

Telit appreciates the user feedback on our information.

Содержание BLUEMOD+S42/AI/ADC/LUA






















































































Результаты поиска

Содержание BLUEMOD+S42/AI/ADC/LUA

Отзывы:

Telit Wireless Solutions BLUEMOD+S42/AI/ADC/LUA, Руководство пользователя, Страница: 8 / 85

Результаты поиска

Содержание BLUEMOD+S42/AI/ADC/LUA

Отзывы: