TELIKOU
TM-200 Eight Channel Main Station
6
please re-adjust panel Mic. gain.
23. Function DIP Setting
5 digits dipper has following settings:
DIP1 (Interrupt on Ann):
On: Disable microphone signal to intercom channel when announcement is ON.
Off: Enable microphone signal to intercom channel when announcement is OFF.
DIP2 (Call on Talk A):
On: Enable auto call function of Channel A. When Talk switch is turned on, it automatic sent
a call signal to Channel A.
Off: Disable auto call function.
DIP3 (Call on Talk B):
On: Enable auto call function of Channel B. When Talk switch is turned on, it automatic sent
a call signal to Channel B.
Off: Disable auto call function.
DIP4 (Program into IFB A):
On: Enable background program audio sent to channel A IFB OUT.
Off: Disable background program audio sent to channel A IFB OUT.
DIP5 (Program into IFB B):
On: Enable background program audio sent to channel B IFB OUT.
Off: Disable background program audio sent to channel B IFB OUT.
24. IFB Output Connector
3-pin XLR female socket, The pinout is as follows:
Pin 1 --- Common (Shield)
Pin 2 --- Power (+24 VDC)
Pin 3 --- Audio
25. Intercom Line connector
3-pin XLR female socket, The pinout is as follows:
Pin 1 --- Common (Shield)
Pin 2 --- Power (+24 VDC)
Pin 3 --- Audio
26. Termination switch
When this switch is turned to ON position, one 300ohm termination resistor will be connected to
