Telic Picotrack, Руководство пользователя

Страница: 19 / 24

Picotrack 4G User Manual V1.2
Seite 19

Vehicle - Medium Resolution - Off by Motion
Position messages are generated either after 5 km distance or as soon as the driving direction
has been changed more than 45 degrees provided that the vehicle is exceeding 20Km/h.
Driving long distances will be covered by one position message every 5 km, driving short
distances is managed by generating position messages whenever the driving direction is
significantly changed.
As soon as the vehicle has stopped (detected by sensor) the device will go to sleep mode. When
vehicle goes back to move, the device will automatically resume tracking.
Power mode: motion-sleep mode (
5 )
Distance interval: 5,000 m
Course change: 45 degrees
Minimum Speed: 20 Km/h
In addition the following extra messages are generated and sent to the server:

Power On

Ignition signal on / off

Digital Input 2 signal on / off

Device stopped moving ( 1 minute without any sensor motion detection)

Device started moving (according motion sensitivity level 3 )
Configuration SMS:
0011{6digitsIMEI),,,,0,
5000 ,020000700000, 5 0000009, 2 000020000 2222 0000000000 22 000000,,,,,,0,
0,0,0,24,,,, 3 , 60 ,,,, 45 , 20

Vehicle - Low Resolution Track (10min interval)
Position messages are generated in 10 minutes time intervals regardless of motion, speed or
changes of driving direction.
This profile should be used for long distance tracking applications.
Power mode: timer-sleep mode (
4 )
Time interval: 600 sec
Configuration SMS:
0011{6digitsIMEI},,,,
600 ,0,200000700000, 4 0000009,00000000000000000000000000000000,,,,,,0,0,
0,0,24,,,,3,60,

Vehicle - High Resolution Track - Off by Ignition
When the ignition is on, position messages are generated and sent either after an 1 km distance
has been travelled or as soon as the driving direction has been changed more than 30 degrees;
additionally a position message is sent every 5 minutes.
Driving long distances will be covered by one position message every km, driving short distances
is managed by generating position messages as soon as the driving direction is changed more
than 30 deg.
As soon as the Ignition signal is detected as off, the Picotrack will enter the sleep mode.
This profile should be used for all kind of tracking applications where a high accurate position
track is needed.