Telguard FlexHub TGFX-HUB1, Руководство по установке

Страница: 22 / 29

Model TGFX-HUB1 © 2018 Telguard 22
the include process.
Ideally, the new Z-Wave device should be located near the controller. For door locks, many manufac-
turers recommend placing the lock no more than five feet from the controller.
Ideally, the new Z-Wave device should be located near the controller. For door locks, many
manufacturers recommend placing the lock no more than five feet from the controller.
Once the device is discovered by the FlexHub, the Internet light will begin to flash, indicating that the
FlexHub is resetting its connection with the HomeControl Flex server to report the new device.
If the FlexHub does not find a new device to add within 1 minute it will exit inclusion mode and return
to normal operation.
After the device is added and appears in the device list, touch the device icon or the right arrow for
that device to open the device details page. Change the default device name to a more user-friendly
name (e.g., Downstairs Thermostat or Den Lamp) and press the Save button.
In the case of a multi-endpoint device such as a power strip with individually-controllable outlets, use
the same method to assign a user-friendly name to each endpoint in the device list, taking care to
verify that the new name corresponds to the expected endpoint.
REMOVE A Z-WAVE DEVICE
To remove a Z-Wave device from the network, select the device icon or the right arrow next to its icon
to open the device details page. Then select the Delete Device button.
The FlexHub Controller will attempt to exclude the selected device. A flashing Z-Wave LED indicates
the FlexHub is in exclusion mode.
As with adding a device, be sure you are also ready to place the new Z-Wave device into exclusion
mode.
If required, refer to the device manufacturer’s documentation to activate the “Exclude” function
because many devices do not use a physical button to start the exclude process.
Once the device is removed from the network, the Internet light will begin to flash, indicating the the
FlexHub is resetting its connection with the HomeControl Flex server to report the device removal.