Telguard FlexHub TGFX-HUB1, Руководство по установке

Страница: 11 / 29

Model TGFX-HUB1 © 2018 Telguard 11
BUTTON DESCRIPTION
Sync For future use
WPS
When using the FlexHub as a Wi-Fi access point, pair the FlexHub to a client device
by pressing the WPS button on the FlexHub and then pressing the WPS button on
the client device.
Reset
To clear all data and restore the factory default values:
1. Power on the FlexHub and wait 1-2 minutes for normal operation to begin.
2. Hold down the Reset Button for 15 seconds.
3. Release the Reset Button when the LED marquee is presented.
4. The FlexHub Controller is now using the factory default values.
Note that if the FlexHub is the primary controller for your network, resetting it to factory defaults will
result in the nodes in your network being orphaned. It will be necessary after the reset to exclude and
re-include all of the nodes in the network. If the FlexHub is being used as a secondary controller in
the network, return to factory defaults only in the event that the network primary controller is missing
or otherwise inoperable.