36
Service, Latch Enable
An intercom key can always be turned ON for momentary conversation by clicking and holding the key or
button during the conversation. There is also an electronic latching feature that lets you tap intercom keys
to turn then ON or OFF. This permits convenient, hands-free conversation. However, it can also result in a
talk circuit being left on unintentionally.
To enable the keypanel for latching, do the following:
1.
Right-click anywhere on the keypanel.
The Main menu appears.
2.
From the Main menu, select Service.
The Service submenu appears.
3.
From the Service submenu, select Latch Enable.
The menu closes and the keypanel is latch enabled.
NOTE: Latch Enable is only available through the Main menu.
Service, Flash Timeout
Whenever there is an incoming call and there is a talk key assigned to the caller, the talk LED next to that
key will flash. If the Flash Timeout option is enabled, the incoming call will flash for 15 seconds. If the
Flash Timeout option is disabled, the incoming call will flash for 15 seconds and then continue to flash for
as long as the incoming call is active.
To enable Flash Timeout, do the following:
1.
Right-click anywhere on the keypanel.
The Main menu appears.
2.
From the Main menu, select Service.
The Service submenu appears.
3.
From the Service submenu, select Settings.
The Settings submenu appears.
4.
From the Settings submenu, select Flash Timeout.
A checkmark appears next to Flash Time and the menu closes. The keypanel has Flash Timeout
enabled.
Содержание VOIP
