Connector type: One XLR-3M for each channel.
Balanced Configuration Pinouts
Pin 1: Common
Pin 2: Intercom audio low and +24 VDC input
Pin 3: Intercom audio high and +24 VDC input
Intercom Channel, Unbalanced Mode (All BAL / UNBAL switches set to UNBAL position)
Output Level: 1 Vrms ±10%
Input Impedance: 150 ohms
Bridging Impedance: greater than 10,000 ohms ±5%
Call Signaling:
Send: 11 ±3 VDC
Receive: 4 VDC minimum
Connector Type: Uses the same connectors as for balanced mode, above, but with pinouts
modified by BAL/UNBAL switch on back panel as follows:
XLR-3 Unbalanced Configuration Pinouts
Pin 1: Common
Pin 2: +24 VDC input
Pin 3: Intercom audio high
Expansion Input/Output
Connector Type: 1/8" (2.0 m) stereo phone jack
Tip: Talk output
Ring: Listen input
Sleeve: Common
1 7