Connection Notes
Typical connections for the MS2000/EMS4000 are shown starting with Figure
4
,
page
11
. Select the configuration which most closely matches your intended usage.
Cables
The numbers below correspond to the cable numbers in the connection drawings on
the previous pages.
1.
1-channel intercom cable. Sold separately. Use Telex "ME" cables, below. Or,
build per Figure .
ME-25: 25' (7.6 m) cable with Male and Female 3-pin XLR connectors.
ME-50: 50' (15.2 m) cable with Male and Female 3-pin XLR connectors.
ME-100: 100' (30.4 m) cable with Male and Female 3-pin XLR connectors.
2.
2-channel intercom cable. Sold separately. Use Telex "ME /2" cables, below.
Or, build per Figure .
ME-25/2: 25' (7.6 m) cable with Male and Female 6-pin XLR connectors.
ME-50/2: 50' (15.2 m) cable with Male and Female 6-pin XLR connectors.
ME-100/2: 100' (30.4 m) cable with Male and Female 6-pin XLR connectors.
3.
Y adapter cable. Sold separately. Use Telex CA-23-16. Or, build per Figure .
4.
3 ft (0.91 m) speaker cable with RCA plugs. One supplied with each SPS2000A,
SPK-1000, and SPK-2000.
5.
18" (457 mm) EXP IN/OUT cable, stereo miniplug to stereo miniplug. One sup-
plied with each ES4000A.
6.
18" (457 mm) CHANNEL OUTPUT cable, 15-pin Male Dsub to 15-pin Male
Dsub. One supplied with each ES4000A.
7.
Shielded patch cable, 9-pin Male Dsub to 9-pin Female Dsub. Customer local
purchase: available at Radio Shack, etc. Note: All pins must be connected
straight through: do not use an RS232 computer cable!
8.
Shielded patch cable, stereo miniplug to stereo miniplug. Customer local pur-
chase. Available at Radio Shack, etc.
1 4
A u d i o c o m ®
