17
System Status
The following page should be displayed if no access points are available. Make sure that the
Firmware Version
is current (see Chapter 7). Check the Telex website occasionally to check
for updates.
Select the
Wireless Scan
page to show available access points and their channel, signal level and
BSS Mode (including WEP). Press the
Refresh
button to update.
If your network
SSID
is shown in the
Scan
(e.g. wlandemo), the n click on it to automatically
associate the CPE to this AP. After clicking on the SSID and clicking OK, the Status Page
should look like this:
