TeleWell TW-EA510v3(c) 3G/4G, Руководство пользователя

Страница: 45 / 101

44
choose the most suitable level for your network.
AP MAC Address: It is a unique hardware address of the Access Point.
AP Firmware Version: The Access Point firmware version.
WPS Service:
Allows user to enable or disable the WPS Service .
WPS State: Current WPS state in AP. It is be used for WCN (Windows Connect Now).
¤
Configured: This AP is be configured via WPS. It is not allow to configure via WCN.
¤
Unconfigured: This AP is un-configured via WPS. It can be configure via WCN.
WMM: Allows user to enable or disable the Wireless Multimedia function.
Wireless Distribution System (WDS)
It is a wireless access point mode that enables wireless link and communication with other access
point. It is easy to be installed, simply define the peer’s MAC address of the connected AP. WDS
takes advantages of cost saving and flexibility which no extra wireless client device is required to
bridge between two access points and extending an existing wired or wireless infrastructure
network to create a larger network.
In addition, WDS enhances its link connection security in WEP mode, WEP key encryption must be
the same for both access points.
WDS Service: The default setting is Disable. Check Enable radio button to activate this
function.
1. Peer WDS MAC Address: It is the associated AP’s MAC Address. It is important that
your peer’s AP must include your MAC address in order to acknowledge and communicate with
each other.
2. Peer WDS MAC Address: It is the second associated AP’s MAC Address.
3. Peer WDS MAC Address: It is the third associated AP’s MAC Address.
4. Peer WDS MAC Address: It is the fourth associated AP’s MAC Address.
Note: For MAC Address, Semicolon ( : ) or Dash (-) must be included.