TLV-400S H.264/MPEG-2 Professional Digital TV Receiver User’s Manual
1.3.1 Alphanumeric Display
The status display provides clear viewing of status and menu configuration with 2 lines by 40
characters. It is used to control the TLV-400S directly from the front panel.
1
1 8 .
I
F
-
S
N 1
-
B
1
:
4
B
-
d
.
B
0
B
1
1
C
-
L
-
:
O
D
K
0
x
0
:
-
B
3
:
2
:
-
R
B
V
8
-
:
5
B
>
< >
R
:
L
2
-
R 1 :
Figure 2 Alphanumeric Display
Table 3 Regions in the alphanumeric display
1. Lock State
In this upper line of the display, R1:L shows that RF input -1 is
in LOCK state, and R2:- means RF input – 2 is in UNLOCK
state.
B1:-,B2:-,B3:-,B4:-,and B5:- means BNC input -1~5 is UNLOCK
state.
In the bottom line of the display, RF-IN1: LOCK DVB-S2 18.1dB
1.00 x 10-8 shows that lock state, modulation system, SNR and
BER value of RF input – 1.
User can view the status information of RF-IN2, BNC 1~5 by
scrolling left/right using the <,> arrow buttons.
User can change the INPUT PORT STATUS format into MAIN
STATUS or SUB STATUS using the ^ arrow button.
In the MAIN STATUS, the upper line of the display – MAIN: RF-
IN1 shows that MAIN channel is taking input signal from RF-
IN1.
2. Applicable Button
It displays available function buttons for current menu
[ex: ENTER/SLCT (select button); <, >, ^, v (arrow button)]
3. Menu Entries / Status
Bar
It displays sub menus, parameter, or status
Version 1.8 9
1. Lock State
2. Applicable Button
Buttons
3. Menu Entries/ Status Bar
