TLV-400S H.264/MPEG-2 Professional Digital TV Receiver User’s Manual
RECEIVER-1
ADDRESS, COMMUNITY.
NETWORK/MANAGEMEN
T NETWORK/SNMP TRAP
RECEIVER-2
Configure SNMP TRAP RECEIVER-2. It consists of IP
ADDRESS, COMMUNITY.
NETWORK/MANAGEMEN
T NETWORK/SNMP TRAP
RECEIVER-3
Configure SNMP TRAP RECEIVER-3. It consists of IP
ADDRESS, COMMUNITY.
NETWORK/MANAGEMEN
T NETWORK/SNMP TRAP
RECEIVER-4
Configure SNMP TRAP RECEIVER-4. It consists of IP
ADDRESS, COMMUNITY.
DHCP: For changing a function that automatically gives IP address to on and off. If this is ON,
DHCP server should be working to local that connect to the receiver. If this is OFF, then you should
manually setup at the IP ADDRESS menu.
NMS IP Address: This is the IP address of Network Management System (NMS) system allowed to
control the receiver in remote place.
3.2.12 CONFIG/FAULT sub-menu
You could see error status using FAULT menu. There are MAIN, SUB, INPUT PORT, and
THRESHOLD INTERVAL sub-menus.
Table 23 CONFIG/FAULT sub menu architecture
CONFIG
FAULT
Program fault condition of the receiver.
FAULT/MAIN
Program fault condition with MAIN channel audio/video
decoder.
FAULT/MAIN/FAULT OUT
Enable/disable error condition check. Error condition includes
TS UNLOCK, TS SYNC ERROR, TS FLAG ERRROR, TS CC
ERROR, TS CC ERROR EACH PID, TS PAT ERROR, DMX
PAT ERROR, DMX PMT ERROR, DECODER NO VIDEO,
DECODER NO AUDIO, and DECODER LIPSYNC ERROR.
FAULT/MAIN/THRESHOLD
Set threshold for each error condition, TS SYNC ERROR, TS
FLAG ERROR, TS CC ERROR, TS CC ERROR EACH PID, TS
Version 1.8 42