TeleVideo TeleCLIENT TC7020 Series Скачать руководство пользователя страница 9

Страница: 9 / 81

•

Make sure that any equipment attached to this product is also properly

connected to wired receptacles.

DANGER: THE TELECLIENT POWER SWITCH IS NOT THE MAIN DISCONNECT.
THE MAIN POWER DISCONNECT IS THE DETACHABLE LINE CORD.

♦

Warning Notices

A warning notice indicates the possibility of damage to a program, device, system or
data.

2.1.2.

Other Product Safety Considerations

Please note the following:

1. Do not expose the power supply, TeleCLIENT, line cord or monitor to moisture, dust

or corrosive gases.

2. Position the TeleCLIENT in a well-ventilated area; do not allow debris near the

ventilation holes.

3. Keep the TeleCLIENT away from heat sources, including direct sunshine and

heating appliances. The maximum operating temperature is 35ºC (95ºF).

4. Always unplug the TeleCLIENT before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use only a damp cloth for cleaning.

5. Make sure the TeleCLIENT is placed on a stable surface.

6. Do not block slots and openings anywhere on the TeleCLIENT.

7. Use only the type of power indicated on the marking label to operate this product.

Consult your dealer or local power company if you are unsure of the type of power
available.

8. Use only the proper type of power supply cord set (provided in your accessory box)

for this unit. Use a detachable type: UL listed/CSA certified, type SVT/SJT, rated as
10A 125V minimum, VDE approved or its equivalent.

9. Do not allow anything to rest on the power cord.

10. If an extension cord is used with the TeleCLIENT make sure that the total ampere

ratings of all products plugged into the cord does not exceed the extension cord
ampere rating.

Содержание TeleCLIENT TC7020 Series


















































































Результаты поиска

Содержание TeleCLIENT TC7020 Series

Отзывы:

Похожие инструкции для TeleCLIENT TC7020 Series

Бренды по названию

Популярные бренды

TeleVideo TeleCLIENT TC7020 Series, Руководство пользователя

Результаты поиска

Содержание TeleCLIENT TC7020 Series

Отзывы:

Похожие инструкции для TeleCLIENT TC7020 Series

Бренды по названию

Популярные бренды