Televic Plixus AE-R, Руководство по установке, Страница: 114 / 162

perform the following actions on the units:
: click to swap unit . When a unit is faulty, it will be greyed out in the web
server. Click the icon and enter the serial number of the new unit. Click the
checkmark icon to confirm. Note that you can only replace units with units of the
same type.
: click to modify the seat number . If you do this during the initialization, the
next assigned unit number will be the highest unit 1.
: click to remove individual units during initialization. After removal the
microphone LED will blink red again.
It might take several seconds before the microphones start to blink when you click Open
initialization .
You can only manual initialize units with a microphone button. Units without this button (e.g.
Confidea channel selector) are automatically assigned to a seat.
Click Stop initialization to finish and the seats are automatically assigned to the units.
Stopping initialization might take a while, up to one moment depending on the number of
units. The seat number will automatically map to the unit number and the Lingua ID’s to desks
in booths according to the setting Desk per booth .
Click Edit configuration to change the following settings
Edit the label of the unit or booth: click the edit icon to change the label of the unit or
booth.
Swap units :see "Hot swap procedure" for more information.
Change seat number : click the icon , specify the seat number and confirm.
Priority : click the icon ( (delegate), (chairperson) or ) to change priority of the
unit. A VIP unit has the same speech priority as a chairperson but without the prior/next
and start/stop vote function.
Booth configuration : click the booth icon to change the booth configuration.
Create new booths or group desks by changing booth and desk number.
INITIAL IZATIO N 1 1 4