Televes ZAS HBB, Руководство пользователя

Страница: 30 / 68

30
ZAS Hbb
Parameters to define a schedule are:
Channel name. Channels list corresponds to “All TV”. You
can enter a channel number to browse more rapidly the
list.
Date.
Time.
Duration (30 min, 1h, 2h, 3h, 4h, 5h, 6h, 8h or 12h). Default
value can be configured in the settings (see “Default
recording duration” section).
If the schedule is recurrent (no, daily, weekly, working
days).
If this recording will be locked (password required to read
it) (not available in this version).
Select “OK” or “Cancel” button to close the input form.
Note : If the recording is scheduled to start in less than
3 minutes, and there is no proper storage device
connected, a popup is displayed informing you that the
recording will fail if you do not plug in a proper storage
device. This popup closes if you press OK key or at the
start time of the recording.
12.5 Conflicts
When a conflict is detected, a pop-up is displayed so that
you can choose the action to perform to solve the conflict.
You can only record a programme at the same time, but
while recording a programme, you can view another one
which belongs to the same multiplex.
Possible conflicts are:
You start/schedule a recording that overlaps with an
existing recording.
You start a recording whereas you are watching a channel
on another multiplex (possible only when starting a
recording from the channels list or EPG of the main
menu). To start the recording a zapping is required.
A scheduled recording will start in 3 minutes whereas
you are watching a channel on another multiplex. To start
the recording a zapping is required. You have 30 seconds
to make your choice, otherwise the zapping is done
automatically and the recording starts. If the channel on
which the zapping is done is not in the current favorites
list, a switch to “All TV” / “All radio” favorites list is done.
While a recording is in progress, you perform a zapping
on a channel of another multiplex.
In case of conflict between 2 recurrent recordings, the
recurrent recording that you do not choose to keep is
totally cancelled, even if the frequency of occurrences is
different (for instance if a daily recurrent recording is in
conflict with a weekly recurrent recording).
12.6 Failures Management
If the signal level lowers or disappears during the recording,
the signal loss image is displayed and the recording is
paused. The recording will resume automatically once the
signal returns.
The recording duration is set to the total recording
duration, including period of time when the signal was
lost. When running a playback of the record, period of time
when the signal was lost are jumped.
The recording is tagged as broken.
In case of power cut, ongoing recording is stopped and
tagged as broken.
If you go to standby while a recording is in progress, the
recording is not stopped. The adapter will only go to low
power consumption after the recording completion.