User Manual
“RSD - 7296”
44
There are the following options:
- One antenna
.
- Two antennas
- More than two antennas.
If you select this option, you will go directly
to section
9.- System Setup menu
.
By pressing the
or
buttons, you can select one of the options
and confirm it using the
OK
button on the remote control.
-
One antenna
.
Select the type of types of converters that you have in your installation
by pressing the
or
buttons, and confirm your selection using the
OK
button.
The options that are available are:
- One universal LNB
- Two universal LNBs
- Monoblock LNB
- Twin LNB
- Quad LNB
Using the
or
buttons, in the "Satellite" window, select the
desired satellite, and then using the
or
buttons, access the
"Carriers" window where you will be able to select various opera-
tors (transponders) of the selected satellite using the
or
buttons.
Using a compass, direct the antenna towards the desired satellite
until you receive the best possible signal level.
If you do not receive a level higher than 60%, follow these steps:
- Go to the "Carriers" window and using the
or
buttons
modify the operator checking to see if the level has increased.
- Confirm the inclination angle and the position of the antenna.
- Check the position of the LNB.
4.2.- Fix Setup
103332_08.qxd 06/03/2006 11:47 PÆgina 44
Содержание RSD - 7296
Страница 2: ......
Страница 7: ...Instrucciones de uso RSD 7296 7 ESPA OL 5 C 95 50 C Fig 1 Fig 2 Fig 3...
Страница 41: ...User Manual RSD 7296 41 ENGLISH 5 C 95 50 C Fig 1 Fig 2 Fig 3...