Televes OSSGT, Руководство по эксплуатации

Страница: 10 / 16

10
ELECTRIC-ARC FUSION SPLICER
4.5.2 Clean electrodes
Press the “Menu” key and follow the steps displayed on the
device:
4.5.3 Replace electrodes
Press the “Menu” key and follow the steps displayed on the
device:
4.5.4 Self-Diagnosis Test:
Press the “Menu” key and follow the steps displayed on the
device:
4.5.5 Optical correction
Press the “Menu” key and follow the steps displayed on the
device:
4.5.6 USB Mode
Connect the USB cable, included with the splicer, to the PC
to access this mode.
Once connected, you can proceed to do the following
options:
- Update the software of the device.
- Download the records of the unit.
When connected to PC, the following message will be
displayed on the screen:
The PC will show a new disc unit containing the folders
below:
For downloading the records, you must access the folder
“RECORD”, within the same, “SPLICE.TXT” is the fi le that
contains the records of the splices correctly performed,
while, “ERROR.TXT”, contains the failed records.
To update the software version of the unit, you simply
have to introduce the update fi le in the root folder of the
device, just as shown below:
Once the fi le is introduced, unplug the device and reboot
the splicer so the update process is able to begin, when
switched on again a progress bar regarding to the
installation of the update will be displayed.
To confi rm that the update has been successfully installed,
access to
Main Menu
→
System Setting
→
Version .
4.6 System Setting
In this section, the parameters regarding to the main use
of the device can be modifi ed.